攤鋪機作為路面施工的核心設備，憑借精準攤鋪與高效作業的特性，在濟南及周邊地區的多個行業中發揮著關鍵作用，從交通基礎設施建設到工業場地施工，其應用場景覆蓋廣泛且各具技術特點。

　　As the core equipment for road construction, pavers play a crucial role in multiple industries in Jinan and surrounding areas due to their precise paving and efficient operation. From transportation infrastructure construction to industrial site construction, their application scenarios cover a wide range and each has its own technical characteristics.

　　在道路建設領域，攤鋪機是高速公路、國省干道及城市路網施工的 “主力選手”。無論是瀝青路面的柔性鋪設還是水泥混凝土路面的剛性施工，攤鋪機都能通過調節攤鋪寬度（常見 3-12 米）與厚度（5-30 厘米），確保路面平整度誤差控制在 3 毫米以內（以 3 米直尺檢測）。例如，在濟南城市快速路改造中，攤鋪機可將改性瀝青均勻攤鋪，配合壓路機形成密實結構（壓實度≥97%），滿足高流量交通的承載需求；在鄉村公路建設中，其自動化找平系統（如激光或聲波找平）能適應復雜地形，減少人工找平的誤差，提升施工效率 40% 以上。

　　In the field of road construction, pavers are the "main players" in the construction of highways, national and provincial roads, and urban road networks. Whether it is the flexible laying of asphalt pavement or the rigid construction of cement concrete pavement, the paver can ensure that the pavement smoothness error is controlled within 3 millimeters (measured with a 3-meter ruler) by adjusting the paving width (usually 3-12 meters) and thickness (5-30 centimeters). For example, in the renovation of Jinan urban expressway, the paver can evenly spread the modified asphalt and form a dense structure (compaction degree ≥ 97%) with the roller, meeting the carrying capacity requirements of high traffic flow; In rural road construction, its automated leveling system (such as laser or acoustic leveling) can adapt to complex terrain, reduce manual leveling errors, and improve construction efficiency by more than 40%.

　　市政工程施工中，攤鋪機的應用場景更加細分。在人行道與非機動車道鋪設時，可切換至小型攤鋪機（攤鋪寬度 2-4 米），精準處理狹窄空間的彩色瀝青或透水混凝土攤鋪，例如濟南老城區改造中，通過攤鋪機實現 3 厘米厚的透水瀝青鋪設，既保證排水性能（透水率≥20mm/s），又提升城市景觀美觀度。在廣場、停車場等場地施工中，攤鋪機可根據設計要求調整攤鋪速度（0.5-3 米 / 分鐘），確保大面積場地的平整度與材料均勻性，如某物流園區的混凝土停車場施工，攤鋪機配合振搗裝置，使混凝土密實度達到 C30 標準，滿足重載車輛頻繁通行的需求。

　　In municipal engineering construction, the application scenarios of pavers are more segmented. When laying on sidewalks and non motorized vehicle lanes, it is possible to switch to small pavers (with a paving width of 2-4 meters) to accurately handle the paving of colored asphalt or permeable concrete in narrow spaces. For example, in the renovation of the old city area of Jinan, a 3cm thick permeable asphalt paving was achieved through pavers, which not only ensures drainage performance (permeability rate ≥ 20mm/s), but also enhances the beauty of the urban landscape. In construction sites such as squares and parking lots, pavers can adjust the paving speed (0.5-3 meters/minute) according to design requirements to ensure the flatness and material uniformity of large areas. For example, in the construction of a concrete parking lot in a logistics park, pavers are used in conjunction with vibration devices to achieve a concrete density of C30 standard, meeting the frequent traffic needs of heavy-duty vehicles.

　　交通設施建設領域，攤鋪機承擔著機場跑道、港口碼頭等特殊場景的鋪設任務。機場跑道對平整度與抗滑性能要求極高（國際民航組織規定平整度偏差≤2 毫米 / 3 米），攤鋪機需配備高精度的慣性導航系統，確保每延米攤鋪誤差小于 1 毫米，同時控制瀝青混合料的級配（如 4.75mm 以上顆粒含量≥60%），提升跑道的抗裂性能。在濟南周邊的港口碼頭施工中，攤鋪機可用于鋪設耐重載的水泥穩定碎石基層（厚度達 40 厘米），通過分層攤鋪（每層 20 厘米）與即時壓實，使基層承載力達到 150MPa 以上，滿足集裝箱卡車的高頻碾壓需求。

　　In the field of transportation infrastructure construction, pavers undertake the task of laying in special scenarios such as airport runways and port terminals. The airport runway has extremely high requirements for smoothness and anti-skid performance (the International Civil Aviation Organization stipulates that the smoothness deviation is ≤ 2 millimeters/3 meters). The paver needs to be equipped with a high-precision inertial navigation system to ensure that the paving error per linear meter is less than 1 millimeter. At the same time, the gradation of asphalt mixture should be controlled (such as particle content of 4.75mm or more ≥ 60%) to improve the crack resistance of the runway. In the construction of ports and terminals around Jinan, pavers can be used to lay heavy-duty cement stabilized crushed stone base (with a thickness of up to 40 centimeters). Through layered paving (20 centimeters per layer) and instant compaction, the base's bearing capacity can reach over 150 MPa, meeting the high-frequency rolling requirements of container trucks.

　　工業與民用建筑領域，攤鋪機在廠區道路、倉儲地面等場景發揮重要作用。大型工廠的物流通道需承受叉車、重型貨車的長期碾壓，攤鋪機可鋪設 15-20 厘米厚的鋼筋混凝土，通過振動攤鋪裝置消除氣泡（含氣量≤4%），提升地面的耐磨性能（磨耗量≤3kg/㎡）。在商業綜合體的地下車庫施工中，攤鋪機可實現金剛砂耐磨地坪的均勻攤鋪，配合機械抹光，使地面硬度達到莫氏 7 級以上，同時通過坡度控制（0.5%-2%）確保排水順暢，避免積水腐蝕。

　　In the fields of industrial and civil construction, pavers play an important role in factory roads, storage floors, and other scenarios. The logistics channels of large factories need to withstand long-term crushing by forklifts and heavy trucks. The paver can lay reinforced concrete with a thickness of 15-20 centimeters, and the vibration paving device can eliminate bubbles (air content ≤ 4%) and improve the wear resistance of the ground (wear amount ≤ 3kg/㎡). In the construction of underground garages in commercial complexes, pavers can achieve uniform paving of diamond sand wear-resistant flooring, combined with mechanical smoothing, to achieve a ground hardness of Mohs 7 or above. At the same time, slope control (0.5% -2%) is used to ensure smooth drainage and avoid water accumulation and corrosion.