行業資訊

壓路機租賃的這幾點你需要注意

來源：http://www.xiuxiuys.com/ 日期：2022-07-29

在很多的道路建設施工中都會用到壓路機設備，它的使用效率比較高，使用方法也比較的簡單，當然我們在施工時也需要注意這些問題，濟南壓路機租賃小編為您講解。

Road roller equipment will be used in many road construction. Its use efficiency is relatively high and its use method is relatively simple. Of course, we also need to pay attention to these problems during construction. Jinan road roller rental editor will explain to you.

壓路機設備

Roller equipment

作為壓路機的駕駛人員，需要相應的證書才能上崗，更要有熟練的駕駛技巧，在整個壓路機設備工作或行進中，若緊急制動時，要先踏下主離合器踏板以堵截動力，然后在踏制動踏板，不然易損壞制動器，還有就是若是帶差速鎖死設備的壓路機，在正常工作時應將差速鎖死設備置于差速方位，這樣便于機器運轉，以免機器出現故障影響使用。

As the driver of the road roller, you need corresponding certificates to take up the post, and you need to have skilled driving skills. During the operation or travel of the whole road roller equipment, if there is emergency braking, you should first step on the main clutch pedal to block the power, and then step on the brake pedal, otherwise the brake will be damaged. In addition, if the road roller is equipped with differential locking equipment, the differential locking equipment should be placed in the differential direction during normal work, This is convenient for the machine to operate, so as to avoid the machine failure affecting the use.
濟南壓路機租賃

壓路機設備

Roller equipment

另外，壓路機設備在上坡的時候，需要變換檔位，下坡時應掛低速擋，如果是幾臺壓路機聯合工作時，其距離應大于3m，這樣可以防止發作磕碰或形成轉向困難，在工作行進中，若發現換向離合器或起振離合器有打滑表象，應立即停機，仔細檢查壓路機設備各個零部件，看是否有損傷的情況，對換向離合器或起振離合器進行檢查、調整及排除故障。

In addition, when the roller equipment goes uphill, it needs to change gears, and when going downhill, it should be in low gear. If several rollers work together, the distance should be greater than 3m, so as to prevent bumps or steering difficulties. During the work, if the reversing clutch or starting clutch is found to be slipping, it should be stopped immediately, and all parts of the roller equipment should be carefully checked to see whether there is damage, Check, adjust and troubleshoot the reversing clutch or starting clutch.

希望以上分享能幫助到大家，我們在操作壓路機時要熟練掌握其操作方法，注意施工，注意周圍環境，遇到緊急情況需要停止操作，檢查機器設備及時排除故障后在進行壓路機的施工。更多內容就來網站http://www.xiuxiuys.com咨詢吧。

I hope the above sharing can help you. When operating the roller, we should master its operation method, pay attention to the construction, pay attention to the surrounding environment, stop the operation in case of emergency, check the machinery and equipment, and carry out the construction of the roller after troubleshooting in time. Come to the website for more information http://www.xiuxiuys.com Consult.

上一條：路面機械設備租賃延長壽命的方法

下一條：攤鋪機養護注意事項以及問題預防