公司新聞

怎么減少水穩拌和站產生的不好影響

來源：http://www.xiuxiuys.com/ 日期：2022-10-28

在使用濟南水穩拌和站的時候，難免會弄得工地上到處是塵土飛揚，而且也會產生很大的噪音，不過小編覺得可以通過以下方式來減少水穩拌和站產生的噪音及造成的環境污染問題。

When using Jinan Water Stable Mixing Station, it is inevitable that the construction site will be full of dust, and will also produce a lot of noise. However, Xiaobian thinks that the noise generated by the Water Stable Mixing Station and the environmental pollution caused by it can be reduced by the following ways.

1、注意天氣變化。大家知道水穩拌和站都是露天工作，大風和暴雨天氣是不適宜露天作業的，暴雨天會損傷機器，降低使用壽命，然而大風天氣下作業，會造成沙塵彌漫，污染周邊環境，所以在作業時注意天氣預報，避免這種惡劣天氣。

1. Watch the weather. As we all know, the water stabilized mixing station works in the open air. It is not suitable for outdoor operation in windy and rainstorm weather. The rainstorm will damage the machine and reduce its service life. However, the operation in windy weather will cause sand and dust to diffuse and pollute the surrounding environment. Therefore, pay attention to the weather forecast during the operation to avoid such bad weather.

2、遠離居民區。水穩拌和站在作業時產生的噪音非常大，這就需要把站點建立在遠離居民的地方，防止擾民。

2. Keep away from residential areas. The noise generated by the operation of the water stabilized mixing station is very loud, so it is necessary to build the station far away from the residents to avoid disturbing them.
濟南水穩拌和站

3、經常對施工現場灑水。這樣做的目的是為了保持現場土地濕潤，干燥的地面容易起塵土，夏天灑水也容易降溫。

3. Water the construction site frequently. The purpose of this is to keep the site wet. The dry ground is prone to dust, and watering in summer is also easy to cool down.

4、及時處理垃圾。水穩拌和站在工作過程中會產生大量的廢料及垃圾，要及時對其場區的垃圾進行清掃并集中運至渣土消納場。

4. Dispose of garbage in time. The water stabilized mixing station will produce a large amount of waste and garbage in the process of work. The garbage in the site area shall be cleaned in time and transported to the waste disposal site.

此外水穩攪拌站在建設和生產過程中，會出現故障。攪拌主機悶車現象時有發生。這種故障多半是由于攪拌主機中的攪拌槳攪拌故障，帶動攪拌主軸的悶車，直至停止轉動。所有這些故障也要多加注意，更多事項就來我們網站http://www.xiuxiuys.com咨詢吧！

In addition, the water stabilized mixing plant will fail during construction and production. The main mixer is often stuck. This kind of failure is mostly due to the mixing failure of the mixing paddle in the mixing host, which drives the boring of the mixing spindle until it stops rotating. Pay more attention to all these faults, and come to our website for more information http://www.xiuxiuys.com Consult!

上一條：壓路機注意三點能讓您使用得心應手

下一條：瀝青路面施工規范缺陷以及其他影響